This header requires Flash 7 or higher.
For MetaliCom Products and Information:
To navigate this website you need Flash. Sorry.

One of the major requirements for designing Fiber Optic equipment in applications such as DWDM (Dense Wave Division Multiplexing) and EDFA (Erbium Doped Fiber Amplifier) is to reduce the light source amplitude without changing the basic wave form.
This can be achieved by using Fiber Optic passive attenuators.
FiberDeal attenuators feature a proprietary type of metal-ion doped fiber which reduces the light signal as it passes through. This method of attenuation enables higher performance than fiber splices or fiber offsets, which function by misdirecting rather than absorbing the light signal. FiberDeal attenuators are capable of performing in the 1310, C and L Bands.
FiberDeal attenuators are capable of withstanding over 1W of high power light exposure for extended
periods of time, making them well-suited to EDFA and other high-power applications.
Low Polarization Dependent Loss (PDL) and a stable and independent wavelength distribution make them ideal for DWDM.


o Metal Ion Doped Fiber
o High-power Light Source Durability
o Wavelength Independence / Precise Control of Attenuation Range
o High Attenuation for Connector & In-line Type Attenuators
o Attenuation Levels Ranging from 1dB to 30dB
o Standard and Premium Tolerances, plus Custom Configurations.
o 1310nm, 1550nm, 1250-1625nm and 1350/1550nm Dual Wave Lengths
o Compliance with Bellcore GR-910 CORE/JIS C5920

SC Attenuator LC Attenuator
FC Attenuators